HGA ST PRO
PEM Hydrogen generator with ZeroAir integrated
The HydroGen series HGA ST PRO is able to generate up to 600 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). An AirGen output can deliver hydrocarbon free pure Air with a flow up to 2000 cc/min.
The HGA ST PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free.
The HGA ST PRO is the ideal Hydrogen and Air Generator for all GC-FID detectors. The on-board CPU constantly controls the operating parameters to guarantee full safety. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
![PEM Hydrogen Gas Generator HGA ST PRO](https://www.lni-swissgas.eu/en/wp-content/uploads/sites/2/2019/07/PEM-hydrogen-gas-generator-HGA-ST-BASIC-PRO-600x1225.png)
Product features
- Quick installation
- Easy use
- Hydrogen flow rate up to 600 cc/min
- ZeroAir flow rate up to 2000 cc/min
- Pressure up to 16 bar (232 psi)
- Hydrogen purity: 99.99999%
- THC: < 0.1 ppm
- RS 485 and USB as standard
- LAN optional
- Dryer with no maintenance
- Reduced foot print
- High pressure GLS electronically controlled (patented)
Main applications
- Carrier gas for GC and GC-MS
- GC-FID / GC-NPD / GC-FPD
- THA
Technical specifications
Models: HGA ST PRO | 100 | 160 | 250 | 350 | 600 |
General data | |||||
Electrolytic cell | PEM technology | ||||
Drying system | PSA (Pressure Swing Adsorption) | ||||
H2 purity | >99.99999% 1 | ||||
Outlet pressure | 12 bar (174 psi) / 16 bar (232 psi) (optional) | ||||
H2 flow-rate cc/min (Max) | 100 | 160 | 250 | 350 | 600 |
Dimensions (WxHxD) | 9.5 x 44 x 48 cm | ||||
Net weight (no water in tank) | 22 kg | ||||
Communication | |||||
RS485/USB | Standard | ||||
LAN | Optional | ||||
Software functions | |||||
Parallel mode | Ready on board | ||||
Automatic tank refill | Standard | ||||
Water | |||||
Quality | Deionized, ASTM II, <0.1uS | ||||
Supply pressure (min, Max) | 0 bars (0 psi), 0.5 bar (7.25 psi) | ||||
Internal tank capacity | 0.3 l | ||||
Electrical data | |||||
Type of connection | IEC 320-C14 | ||||
Power supply voltage | 100-240 Vac (±10%) 50/60 Hz | ||||
Nominal power (Max) | 350W | 500W | |||
Fuse rating (5x 20 mm) | 4A (250VAC -T) | ||||
Connections | |||||
Hydrogen outlet | 1/8” compression fitting | ||||
Water (inlet, drain) | Quick release push-in fitting | ||||
ZeroAir section | |||||
Inlet pressure (Max) | 8 bars (116 psi) | ||||
Max THC (Inlet Air) | 100ppm | ||||
Outlet flow rate (max) | 2000 cc/min | ||||
Outlet pressure (max) | Inlet pressure – 0.5 bars (8 psi) at maximum flow | ||||
THC (ZeroAir Outlet) | <0.1ppm | ||||
Inlet, Outlet ports | 1/8″ BSPP female |
1 Referred to O2 – DewPoint < -75°C (< -103°F), Atmospheric Dew point (ADP)
Information request
Need more information about this product?
Please contact us at info@lni-swissgas.eu or fill the form.